How to solve chain block of chain hoist

The chain of the chain hoist has become stuck, and due to improper handling, the chain of the chain hoist has broken. How to solve the problem of chain blockage when using a chain hoist to lift heavy objects?

When using a chain hoist to lift heavy objects and encountering chain jamming, the correct handling method should be taken to solve the problem, in order to avoid damage to the components of the chain hoist. After the chain block occurs on the chain hoist, the operation should be stopped immediately and do not forcefully pull the chain. Remove the suspended object, then dismantle the chain hoist and smooth the chain. Observe the condition of the chain when organizing it. If the chain is damaged or severely rusted, it should be immediately replaced with a new one to ensure its normal use.

If the chain is not malfunctioning, then it is necessary to consider whether the operation is illegal. The phenomenon of chain jamming is most likely to occur when the hand chain hoist is pulled diagonally for lifting. Diagonal lifting will increase the load-bearing capacity of the chain, and the heavy object will swing significantly after lifting, which can cause the chain block to become stuck.

After the chain block phenomenon occurs on the chain hoist, the operation should be stopped immediately, the cause of the fault should be identified and promptly resolved. Chain hoist is a commonly used small lifting tool. In addition to standardized operation, daily maintenance is also essential, which can effectively reduce tool damage and extend the service life of the equipment.